|
PuROMaxtm |
|
How Does it Work? |
|
The PuROMaxTM HR-3 Improves Recovery Rate By As Much As 400%
|
|
The PuROMax HR-3 is one of the most environmentally friendly units on the market. Unlike systems that pump the drain back into the water supply, the HR-3 uses less water overall. The reverse osmosis unit processes water at the molecular level. By squeezing ordinary tap water against a special membrane, pure water molecules are separated from impurities. These impurities are automatically rinsed down the drain leaving only clean great tasting water. As a tank fills on a reverse osmosis unit it generates back pressure on the membrane. On most reverse osmosis units this added back pressure causes the membrane to work harder to make pure water. The PuROMax High Recovery unit utilizes a non-electric energy recovery device, called a permeate pump, which dramatically improves the efficiency of an R/O system. Therefore by removing the back pressure, the drain amount never changes. This unit will improve recovery by as much as 400% and reduces waste water by 80%. It also increases product tank pressure (up to 95% of feed pressure). By using less water this also means that the filters last longer and do not need to be changed as often.
|
|
Specifications System Capacity............................................. 50GPD. Tank Capacity .4.4 gal. Rejections....................................................... 98% min. Pre-Filter carbon block Post Filter....... ...GAC Membrane....... ..TFC TDS.. .2000p.p.m. max. Feed Pressure................................................. 30-100psi. Feed Water PH ...3-11 Water Temperature........................................ 40-80F. Chrome Faucet ... Long Reach Reduces Drain .......................................up to 80% Iron.....................................................................1 ppb max Hardness............................................................10-12 gpg max
|